background image

23366b GB/2019-07

5 / 30

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

6.2 

Error analysis   .............................................................................................................20

6.2.1 

Error-free state (CONTROL)   ......................................................................................22

6.2.2 

Excessive temperature (TEMPERATURE)   ................................................................22

6.2.3 

Incorrect adjustment (TRANSDUCER)   ......................................................................22

6.2.4 

Short-circuit and open circuit (TRANSDUCER)   .........................................................23

6.2.5 

Dry running identi

fi

 cation (DRY)   .................................................................................23

6.3 

Customer service   .......................................................................................................24

6.3.1 

Repairs and service   ...................................................................................................24

6.3.2 Decontamination 

certi

fi

 cate   ........................................................................................24

6.4 

Replacement of a module or removal of a dummy plate    ...........................................25

Accessories   ................................................................................................................26

7.1 

Required accessories  

- not applicable -   ............................................................................ 26

7.2 

Optional accessories   ..................................................................................................26

7.2.1 

Remote control   ...........................................................................................................26

7.2.2 

Processor module PRO 3 ............................................................................................27

7.3 

Preparations   ...............................................................................................................28

Consumable materials  

- not applicable -

   .....................................................................28

Taking the unit out of service   ......................................................................................28

10 

Key words  

- not applicable -   ................................................................................................ 28

Informative appendices

Housing versions  

Содержание SONOREX TECHNIK LG Series































Отзывы: