BANDELIN SONOREX DIGITEC, Инструкция пользователя

Страница: 9 / 36

9 / 36 1566g GB/2019-02
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
/* In order to improve the effect the ultrasound is being modulated whereby a 4-fold ultrasonic nominal output value is yielded as
ultrasonic peak power.
Speci fi cations for use as a medical device
Name: Ultrasonic bath
UMDNS nomenclature (ECRI / DIMDI): 14-263
Purpose: See chapter 1.2.
Classi fi cation (Medical Device
Directive 93/42/EWG, Appendix IX): Class I; active, non-invasive,
non-implantable medical device
Type, model, serial number, year of manufacture: See type plate on the rear side for information
The ultrasonic bath has been inspected pursuant to norms currently in effect and is to be installed
and put into operation pursuant to EMC directions.
Speci fi cations pursuant to the Medical Devices Operator Ordinance (MPBetreibV):
Startup on location, functional check
and personnel training (section 4):
not required
Technical safety controls, (STK, section 11): no speci fi cations
Technical measurement controls, (MTK, section 14): not applicable
1.4.1 Electromagnetic ambient conditions (EMC)
The device was tested to DIN EN 61326-1 for electromagnetic compatibility (EMC) and complies
with the requirements for class B devices according to EN 55011.
It is suitable for use in facilities and areas which are directly connected to a public low-voltage
supply network, e.g. medical laboratory facilities.
It may generate radio interferences or disrupt the operation of devices nearby. It may be necessary
to take remedial measures such as realigning the device or a recon
fi guring the ultrasonic bath or
the shield.
Bath type
Order
No.
Interior dimensions
(L × W × D)
Operat-
ing
volume
Outlet
(valve)
Ultrasonic peak
power* / Ultrasonic
nominal output
Weight
(net)
Heating
power
Current
consump-
tion
(230 V)
Current
consump-
tion
(115 V)
mm l W / W
eff
kg W A A
DT 510 3245 300 × 240 × 150 6.6 G ½ 640 / 160 7.3 - 0.7 -
DT 510 H 3206 300 × 240 × 150 6.6 G ½ 640 / 160 7.4 400 2.5 -
DT 510 H-RC 3091 300 × 240 × 150 6.6 G ½ 640 / 160 7.4 400 2.5 -
DT 512 H 3226 300 × 240 × 200 8.7 G ½ 860 / 215 8.2 400 2.7 5.4
DT 514 3250 325 × 300 × 150 9.0 G ½ 860 / 215 8.5 - 1.0 1.9
DT 514 H 3211 325 × 300 × 150 9.0 G ½ 860 / 215 8.7 600 3.6 7.1
DT 514 BH 3216 325 × 300 × 200 12.5 G ½ 860 / 215 9.8 600 3.6 7.1
DT 514 BH-RC 3095 325 × 300 × 200 12.5 G ½ 860 / 215 9.8 600 3.6 7.1
DT 1028 3255 500 × 300 × 200 19.0 G ½ 1200 / 300 13.9 - 1.4 -
DT 1028 H 3231 500 × 300 × 200 19.0 G ½ 1200 / 300 14.6 1300 7.0 14.0
DT 1028 CH 3266 500 × 300 × 300 30.0 G ½ 1200 / 300 23.3 1450 7.7 15.3
DT 1050 CH 3271 600 × 500 × 300 60.0 G ½ 2400 / 600 37.0 1950 11.1 17.9