background image

Doc # 160018_01
Part #  13403
Released 05/05/14

2.3 Ah V-06 Installation Instructions

Battery Backup             Kit

 

BATTERY BACKUP KIT 2.3Ah V-06 - ORDER NO. 61932

ITEM DESCRIPTION

QTY ORDER 

CODE

1

BATTERIES COVER

1

16460

2

BATTERIES SUPPORT

1

16480

3

BATTERY 12V SEC 12-2.2 AGM TYPE

2

15470

4

BATTERY COUPLING WIRE - ESV24

1

12005

5

BATTERY HARNESS

1

15670

6

PAN HEAD SCREW W/WASHER M4x8

2

10320

7

CABLE CLAMP ACC-1.5 (3/16”)

1

11750

8

CHARGER BOARD SBC-02

1

60915

9

SBC-02 CHARGER HARNESS

1

14117

10

SBY-2 BATTERY HARNESS

1

15660

PACK #1 (SECTIONAL DOOR OPENERS)

11

HEX STANDOFF M4

2

11190

12

PAN HEAD SCREW W/WASHER M4x8

4

10320

13

THRUSS SER HD SCREW “S” RoHS M4x8

2

10503

14

TAPTITE SCREW “P” M4 X 8

3

10580

15

PCB SUPPORT 76X27

1

16421

PACK #2 (ROLLER DOOR OPENERS)

16

TAPTITE SCREW “P” M4x8

4

10580

17

TAPTITE SCREW “P” M4x10

2

10570

18

CABLE CLAMP ACC-1.5 (3/16”)

1

11750

BATTERY BACKUP KIT SBC-02 - ORDER NO. 90488

ITEM DESCRIPTION

QTY ORDER 

CODE

19

BATTERY CHARGER BOX ASSEMBLY

1

90150

20

CHARGER ASSY SBC-02 

1

60914

ACCESSORY PACK 

21

TIE MOUNT CM-13 (ADHIESIVE)

4

11835

22

CABLE TIE 4” GT-100M

4

14160

23

BRACKETS GE 44 621

4

62480

24

SCREW “P” M3.5 X 13 FOR GW 44 621

4

62826

Garage Door Openers

Swing Gate Openers

BATTERY BACKUP KIT ESV24V2 - ORDER NO. 61928

ITEM DESCRIPTION

QTY ORDER 

CODE

25

BATTERY CP1223H 12V 2.3H

2

15470

26

CHARGER ASSY SBC-02 

1

60914

27

BATTERY COUPLING WIRE - ESV24

1

12005

28

BATTERY HARNESS

1

15670

29

TAPTITE SCREW “P” M3 X 8

4

10560

Sliding Gate Openers

Important Safety Instructions

 

WARNING!

• 

DO NOT 

short the output of batteries. 

Serious personal injury

 and/or property damage 

can result from failure to follow this warning

• 

During charging and discharging cycles the lead-acid batteries may release explosive 

gases.  Ensure that the area around the batteries is well ventilated

• 

Take care not to allow any metal objects to make contact with the positive and negative 

terminals. This will short circuit the battery causing sparks and possible damage to the 

battery, or even cause an explosion.

 

ELECTROCUTION!

• 

The battery box unit should be installed away from sprinkler systems.

• 

DO NOT

 immerse in water or spray directly with a hose or other device.

• 

Disconnect the power cord from mains power before making any repairs or removing 
covers.

CAUTION:

Muscular strain

• 

Practice correct lifting techniques 

Fall from ladder

• 

Ensure ladder is the correct type for job.

• 

Ensure ladder is on flat ground.

• 

Ensure user has 3 points of contact while on ladder.

Burns

• 

DO NOT

 handle damaged or leaking batteries

• 

Wear appropriate protective clothing and avoid touching your eyes after working with 
batteries.

• 

The battery backup kit contains sealed lead-acid batteries that must be disposed of 
properly at the end of their useful life.

Gen 2

Содержание V-06









Отзывы: