Light Status
Battery
Solid
OK
Flashing
Replace
No light
Replace
3 . 0 C O D I N G A R E M O T E C O N T R O L
S T E P O N E
The opener can only be operated from remote
controllers that have been programmed into its
memory. Up to 64 remotes (8 for Roll-A-Pro) can be
programmed.
Battery Type: 1 x CR2032.
W A R N I N G ! : The battery is hazardous and must
be kept out of reach of children. The battery can
cause severe of fatal injuries within 2 hours or
less if swallowed or placed inside any part of the
body. If you suspect the battery has be
swallowed or placed inside any part of the body,
SEEK IMMEDIATE medical attention.
S T E P T H R E E
Switch power on
Press and
release
HOLD for 3 sec
HOLD for 3 sec
RELEASE
S T E P F O U R
Press to test
tip
S T E P O N E
4 . 0 C H A N G I N G A B A T T E R Y
Check Light
Status Table
S T E P T W O
tip
Use screwdriver
to remove
scews and
open
S T E P T H R E E
Use non-metallic
object to push
out.
remove
controls cover
S T E P T W O
RELEASE
HOLD
C O D I N G R E M O T E F R O M T H E O P E N E R
S T E P O N E
S T E P T W O
Take a pre-coded
remote and press the
button to duplicate
R E M O T E L Y C O D I N G A R E M O T E C O N T R O L
Remotely coding works when you have a
pre-coded remote control and are in range of the
opener.
tip
Use a pen,
HOLD for 2 sec
the middle button
through the
coding hole
S T E P T H R E E
Opener flashes & beeps
HOLD for 3 sec
HOLD for 3 sec
RELEASE
Take new
remote
RELEASE
S T E P F I V E
Press to test
Opener stops flashing &
beeping
