background image

15

Controll-A-Door

®

 

Power Drive & Roll-A-Pro

®

  

Instruction Manual

16. Opener Safety & Security

Your Door CAN NOT be used by the opener when:

a. There is a locking device installed.
b. There is a power failure.

Your Door CAN be used when:

a. There is an emergency, by disengaging the opener.
b. There is a power failure, by disengaging the opener.

 

To Disengage the Opener:

a. It is recommended to do so with the door in the closed position.
b. Pull down on the manual release cord, until you hear a click.
c. Move the door manually.

To Re-Engage the Opener:

a. Check the door has not been locked by a locking device.
b. Pull down on the manual release cord, until you hear a click.
c. The door will now operate from the opener.

CAUTION:

 When the opener is manually disengaged, 

the door is no longer locked. To lock the door manually, 
re-engage the opener after the door is closed.

WARNING!

 Please test the manual release mechanism 

to ensure that the manual release is easy to operate. 
No more than 15 kg of force should be required to 
disengage the door using the manual release cord. If 
excessive force is required reset the close limit position 
(Section 10. Resetting Door Limits).

17. Operating your Opener

To Operate the opener: 

a. Press the programmed transmitter button until your 

door begins to move (usually 2 seconds). Make sure 
you can see the door when you use the transmitter.

b. If you are in a vehicle you should aim the transmitter 

through your windscreen as shown.

c. Check that the door is fully open or closed before you 

drive in or away.

d. If you press the transmitter whilst the door is moving 

the door will stop. The next press of the transmitter will 
move the door in the opposite direction.

1. TO DISENGAGE:

PULL HANDLE DOWN 

& RELEASE

2. TO RE-ENGAGE:

REPEAT ACTION

PULL 

HANDLE

WARNING!

 When operating the manual 

release (while the door is open) the door 
may fall rapidly due to weak or broken 
springs, or due to being improperly 
balanced. 
Do not disengage the opener to manual 
operation with children/persons or any 
objects including motor vehicles within the 
doorway.

Содержание Controll-A-Door TB-6

























Отзывы: