The Solar Family Series Inverter
19
Please ensure that the spring is closed. (see
Figure 16
.)
3. Push connectors together. (see
Figure 17
.)
Screw cable gland tight. Screw in the nut until it reaches the O-ring and then tighten it with at
least 2 Nm using a suitable tool. Finished!
Connector/socket unlocking process:
Figure 17
1. Insert screwdriver SZF 1 or phase tester in one of the illustrated positions.
2. Leave screwdriver inserted and remove connector from socket.
Conductor reconnection:
Figure 18
1. Screw on the cable gland.
2. Never open the interlock as shown in the figure by using the screwdriver.
3. Pull plug connectors apart.
4. Open spring with screwdriver and remove conductor.
