20
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Solution
SOLEPLATE IS
NOT HEATING
EVEN THOUGH
IRON IS TURNED
ON.
Connection problem
Check main power supply cable, plug
and outlet.
Temperature control is in MIN position Select adequate temperature
IRON DOES NOT
PRODUCE STEAM
Not enough water in tank
Fill water tank
Steam control is selected in non-
steam position.
Set steam control between positions
of minimum steam and maximum
steam (see“iron chart”).
Selected temperature is lower than
that specified to use with steam.
Select a higher temperature
SPRAY
FUNCTION DOES
NOT WORK
Not enough water in tank
Fill water tank (see “getting started”,
no 2).
STEAM JET AND
VERTICAL STEAM
JET FUNCTION
DOES NOT WORK
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position and
wait before using steam jet function.
Iron is not hot enough
Adjust to higher temperature to steam
ironing. Put iron in vertical position
and wait temperature indicator light
turns off.
THE IRON
LEAKING
The temperature setting is too low to
produce steam.
The variable steam knob must be set
on“0”position until the iron is hot.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste electronic
and electrical devices. Do not dispose of this product in the bin, instead going to the electri-
cal and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.
