14
Documentation Number 232PCC23799 Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353-91-792444 – Fax +353-91-792445
Furthermore, some systems use the high memory area for BIOS
shadowing to improve overall system performance. In order for the
Enabler to operate, any BIOS shadowing must be disabled in the
address range specified for the configuration window. BIOS
shadowing can usually be disabled through the system's CMOS
setup utility.
Socket Numbers
The Enabler requires the 232PCC2's socket number to be
specified on the command line and the 232PCC2 must be inserted
into the socket before the Enabler is invoked. Some vendors
number their sockets from 1 to N while other vendors number their
sockets from 0 to N-1. For the 232PCC2 Enabler, the lowest socket
number in the system is designated socket 0.
Card and Socket Services Software
In order to use the 232PCC2 Enabler for DOS, the system
MUST NOT be configured with Card and Socket Services software.
If a Card and Socket Services software is installed, the 232PCC2
Enabler may interfere with its operation and with the device(s) it
controls. For systems configured with Card and Socket Services,
the 232PCC2 Client Driver is the recommended method of
configuration.
