33
If you DO require remote communication through a router or gateway,
type
Y.
The
Gateway IP Address: (000)
prompt appears. Enter the IP
address of the default gateway within your local network by typing
each address octet followed by pressing
Enter.
After the new settings have been accepted they will appear in the Configuration
Menu. After the Configuration has been saved to the MES1A/B, the new settings will
appear in the Device Details tab.
NETMASK
Typically you will type
N,
or just press
Enter
to cause the MES1A/B to automatically
use the standard
Netmask
appropriate for the IP address being used. The default
value for this parameter is
---not set---.
To change the Netmask setting
20.
Press
Enter
to keep the current setting
21.
Press
Y
to change the setting
22.
At the prompt type in four octets representing the new Netmask.
After the new settings have been accepted they will appear in the Configuration
Menu. After the Configuration has been saved to the MES1A/B, the new settings will
appear in the Device Details tab.
For more information or direction on the netmask
you may require, consult your network
administrator.
TELNET CONFIGURATION PASSWORD
You can set up a
Telnet Configuration Password
to control unauthorized access to
the Telnet Configuration interface.
23.
Type
Y
. The
Enter New Password:
prompt appears.
