ii
FCC Radio Frequency Interference Statement
iMcV-S2MM/1250 and iMcV-S2SM/1250
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operate d in a
commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipm ent.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the
Class Alimits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Departmen t of
Communications.
Le présent appareil numér
ique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de
classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
iMcV-LIM, iMcV-PIM, iMcV-S2MM/155, iMcV-M2MM/155 and iMcV-S2SM/155
This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful i nterference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which the user will be required to correct the interference at hi s own expense.
Any changes or modifications not expressly approved by the manuf
acturer could void the user’s authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the
Class B limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department
of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numérique s de
classe B prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
