7. Operation
22
(b) SWITCH TEST
This screen is used to test each switch and control.
1
In the I/O TEST screen, select SWITCH TEST and press the Enter switch. The SWITCH TEST
screen appears.
2
Entering each switch changes the display.
3
Hold the Select switch flipped up and press the Enter switch to return to the I/O TEST
screen.
SWITCH TEST screen
Item
Description
(a) COIN INPUT1
Adds 1 to the count each time a coin is input for coin 1. When the count exceeds
999 it returns to 0.
(b) COIN INPUT2
Adds 1 to the count each time a coin is input for coin 2. When the count exceeds
999 it returns to 0.
* COIN INPUT2 checks the operation of BILL VALIDATOR.
(c) SERVICE
Displays ON when you press the Service switch.
(d) TEST
Displays ON while the machine is in Test mode. Turn it off to return to the game
screen.
(e) UP SELECT
Displays ON when you flip the Select switch up.
(f)
DOWN SELECT
Displays ON when you flip the Select switch down.
(g) ENTER
Displays ON when you press the Enter switch.
(h) SERVICE PANEL
Displays ON when the service door is open.
(i)
VIEW CHANGE BUTTON
Displays ON when you press the view change button.
(j)
WEAPON TRIGGER
Displays ON when you press the main trigger of the control lever assembly.
(k) WEAPON BUTTON
Displays ON when you press the special button of the control lever assembly.
(l)
THROTTLE LEVER
Increases or decreases the numerical value when you tilt the throttle lever
forward or backward.
If you move the lever all the way to the far side and UP OK! is displayed, and all
the way to the near side and DOWN OK! is displayed, it is operating normally.
If OK is not displayed even when you move the lever all the way, calibrate the
lever. (See P-21 "(a) I/F CALIBRATION".)
