background image

68

7. OPERATION

7-5 Cleaning

7-5-1 Cleaning the Gun Assys

 

Do not use  a detergent or chemical for cleaning sensor section.

 

Be careful not to scratch the sensor  section. If the sensor is scratched, the Gun 

      Assy's detection performance will be affected.

 

Do not use organic solvents such as alcohol and acetone for cleaning. Organic 

    solvents can cause deterioration of materials.

 

Do not use alkaline or acidic detergents.

7-5-2 Cleaning the LED board filters

 

Do not use a detergent or other chemical to clean the filters.

 

Be careful not to scratch the filters. If the filters are scratched, the Gun Assy's 

detection performance will be affected.

Filters (10 locations)

Projector mask

Gun muzzle section

 To maintain accuracy of the Gun Assys, clean the gun sensor section on a daily 

       basis. To clean the gun sensor section, wipe with a clean soft cloth.

 To maintain accuracy of the Gun Assys, clean the LED board filters (10 locations)  

        on a daily basis. To clean the LED board filters, wipe with a clean soft cloth. 

Содержание RAZING STORM









































































































































Отзывы: