Bandai Namco RAZING STORM, Руководство по эксплуатации, Страница: 45 / 136

7. OPERATION
41
7. OPERATION

Do not install the machine in any of the following places since those locations
may disallow the sensors from detecting the positions of the Gun Assys.

Place where bright light such as sunlight or spot light can directly shine on the
Gun Assys or screen surface

Place where flashing light causes a large contrast between dark and light.

Make sure that the pedals are not lifted off the floor.
7-1-2 Operation check (after power ON)
Check the following items after turning on the power switch.
(1) Check sound reproduction. (Is sound produced by each speaker?) (See P. 60 “7-4-6
Sound test (SOUND TEST).”)
(2) Check the fluorescent lamp in the Signboard Assy. (Is the fluorescent lamp ON?)
(3) Check the LED-Edge PC Board. (Are the LEDs ON?)
(Two LEDs each on Gun Tower (L) and (R) Assys, and one LED each on Side Pillar
(L) and (R) Assys)
(4) Check images displayed on the screen. (Does the projector show images properly?)
(See P. 59 “7-4-5 Monitor test (MONITOR TEST).”)
To check the following items, press the Service switch and play the game.
(See P. 45 “7-3-1 Adjustment of display”)
(5) Check the Gun Assys for proper operation.
* If the gun aim is not accurate, conduct the gun aim setting. (See P. 51 “7-4-4 (b)
GUN INITIALIZE 1P-2P (Gun Assy aim setting 1P-2P).”)
(6) Check the Gun vibration for proper operation.
(7) Check the Pedal Assys for proper operation.
(8) Check all switches for proper operation. (See P. 49 “7-4-4 Switch input/output tests
(I/O TEST).”)