Bandai Namco DEAD HEAT UNLEASHED Скачать руководство пользователя

Страница: 5 / 78

1. Safety Precautions – Be sure to read to ensure safe operation –

1-4 Machine Warning Labels

The warning labels contain important information for ensuring safety. Be sure

to observe the following.

visible, install the machine in an appropriate location with ample illumination,

and keep the labels clean at all times. Make sure that the labels are not hidden

% * !
% " E*#

new one. To order warning labels, contact your distributor.

Caution sticker Seat Slide (C)

Part No.: 461-776

The seat moves forward and back, and may pinch your
fingers or other items. Do not touch the gaps between
the seat unit and the main base or surrounding areas.

WARNING

SHOCK HAZARD

Do Not Open.

Refer Servicing to Service
Personnel.

Содержание DEAD HEAT UNLEASHED















































































Результаты поиска

Содержание DEAD HEAT UNLEASHED

Отзывы:

Похожие инструкции для DEAD HEAT UNLEASHED

Бренды по названию

Популярные бренды

Bandai Namco DEAD HEAT UNLEASHED, Руководство по эксплуатации

Результаты поиска

Содержание DEAD HEAT UNLEASHED

Отзывы:

Похожие инструкции для DEAD HEAT UNLEASHED

Бренды по названию

Популярные бренды