background image

17

4! 

Should an abnormality occur, turn off the power switch immediately to stop

operations. Then, be sure to disconnect the power cord plug from the outlet.

   

accident.

  !"

regularly and remove any dust.

Fully insert the power cord plug into the outlet. Poor contact may generate

  !

Before operating the machine, be sure to check that installation has been

    /<!

Delivery and Installation Conditions, page 1

1

) in this Operation Manual.

]   #$#
 '  !

The warning labels contain important information for ensuring safety. Be

sure to observe the following.

%   

clearly visible, install the machine in an appropriate location with ample 

illumination, and keep the labels clean at all times. Make sure that the 

   '!

% *  !
%"  E*#

new one.

To order warning labels, contact your distributor.

To ensure safe use of the machine, be sure to perform the pre-operation

  /45 "  

17

7 */

89!;*

50

7  > !

inspections or service may result in an accident.

4;5 5

If players start feeling ill because of the game images or light stimulation,

they must stop playing immediately.

In rare cases, stimulation by lights or video images may cause the player

to have a seizure or lose consciousness. If this happens, advise the player

to consult a doctor as soon as possible. When pre-school children play,

instruct their parents or guardians to observe them.

Содержание DEAD HEAT UNLEASHED















































































Отзывы: