Banana Bros OTTO, Руководство пользователя

Страница: 9 / 20

HOW OTTO WORKS
Making a sachet or paper cone
1. Make sure that OTTO is fully charged and unplugged.
2. Hold power button in for two seconds to turn power on. OTTO lights up.
3. Insert your sachet or paper cone into the O Tube (OTTO works with any sachet or paper cone that will fit into
the O Tube). Make sure the top of the sachet/paper cone is flush with the top of the O Tube and is not
wrinkled or caved in.
4. Open OTTO by pressing the upper side of the latch and place your dried material evenly onto the
lower milling plate. The plate has a spring below it, so you can push the material down if you want to mill
more at one time. OTTO will mill as much as you can easily fit into the chamber without overflowing it. Close
OTTO.
5. Dock the O Tube magnetically with OTTO and place on table. Keep OTTO upright.
6. Press button to start.
7. OTTO’s SMART Milling Technology™ will sense the material and begin its milling cycle.
8. Tap the entire unit firmly on the table as soon as OTTO starts to mill to make sure the material falls evenly into
the sachet or paper cone.
100% charge
50% charge
10% or less
charge left
white green yellow red