3. WORKING TIME
1
RELEASE THE BARRIER AND MOVE THE ARM IN 45°
2
PRESS AND KEEP PRESSED P1\SET BUTTON FOR 5 SECONDS
3
THE YELLOW LED START BLINKING
RELEASE THE BUTTON
4
IN 3 SECONDS PRESS AGAIN THE BUTTON P1\SET
5
THE BARRIER PERFORM A BRIEF REDUCED SPEED OPENING
(If motor turns in reverse invert wires and start procedure again from the begnning.)
6
THE BARRIER PERFORM A REDUCED SPEED CLOSING UNTIL THE LIMIT SWITCH
7
THE BARRIER PERFORM A NORMAL SPEED OPENING MOVEMENT UNTIL THE LIMIT SWITCH
8
THE BARRIER PERFORM A NORMAL SPEED CLOSING MOVEMENT UNTIL THE LIMIT SWITCH
9
AUTOMATIC LEARNING PROCEDURE FINISHED
AUTOMATIC learning
Slow down is setted by the board
!!! ATTENTION !!!
ADJUST TRIMMERS IF NECESSARY
!!! ATTENTION !!!
A trimmer variation “FOR” (speed) requires the repetition of the learning procedure from
The beginning (vary the manoeuvre time).
8
