BALZER Field Floater 1325 Extension Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 83

background image

NOTE

Visually become aware of which hydraulic levers and joystick controls run

each of the functions on the grain cart.

Operation

INSTRUCTIONS FOR UNLOADING GRAIN CART ON A

SWIVEL UPPER VERTICAL AUGER

3. If

light is not illuminated, rotate swivel head forward or backward till

light comes on.

4. Engage tractor hydraulic lever to un-fold upper auger until upper auger locks in place.

5. Start PTO slowly and use maximum modulation on tractor control.
6. Let PTO get up to speed.
7. Press the trigger on the joystick that controls the clutch. Horizontal auger will engage.

8. Press the button on the top of the joystick that opens the grain doors.
9. Press the buttons on the top of the joystick that open and close the grain doors t

10. When done unloading, press the button on the top of the joystick that closes the grain doors.
11. Press the trigger on the joystick that controls the clutch. Horizontal auger will disengage.

12. Allow PTO to run for 3 to 5 seconds to clean out the vertical auger.
13. Disengage PTO.

RED

(ORANGE marked hose)

(GREEN

light on the joystick will be illuminated)

(Open slowly)

(GREEN light on the joystick will go off)

RED

o control the

amount of grain coming out.

Never transport with vertical auger in unloading position.

Doing so may cause structural damage to the vertical
auger and grain cart.

NOTE

The

light comes on only when it is safe to fold the upper auger up or down.

The upper auger will not move until

light on joystick is illuminated.

RED

RED

1

Engage tractor hydraulic lever to pressurize control valve body.

2. Check if

light on joystick is illuminated.

(BLUE and RED marked

hoses)

RED

Do not disengage PTO before clutch has been shut off. This
could plug the auger with too much grain and you may not be
able to restart auger.

14. Rotate swivel auger head till

.

15. Engage tractor hydraulic lever to fold upper auger down into saddle.
16. Reload grain cart.

RED light is illuminated

(ORANGE marked hose)

BALZER

INC.

Failure to relieve pressure on horizontal auger clutch prior to shutting down
the tractor can cause a failure of the swivel fitting. Trapped oil in the clutch
circuit can expand due to warm temperatures, causing the swivel fitting to fail.

49

«
...
47
48
49
50
51
...
»

Содержание Field Floater 1325 Extension




















































































Отзывы:

Нет отзывов

Похожие инструкции для Field Floater 1325 Extension

Бренд: OMCA Страницы: 36

Бренд: Salford Страницы: 64

Бренд: Echo Страницы: 6

Pro Attachment Series

Бренд: Echo Страницы: 28

Бренд: Echo Страницы: 2

Pro Vantage 12+ Series

Бренд: Ecco Страницы: 6

Бренд: jcb Страницы: 41

Бренд: RayLight Страницы: 34

GAZELLE FREESTYLE

Бренд: Gazelle Страницы: 10

Бренд: Latham Страницы: 19

Бренд: Panta Safe Light Страницы: 2

Бренд: Calrec Страницы: 70

Бренд: Pahlen Страницы: 20

Бренд: Paia Страницы: 7

Бренд: Parkside Страницы: 58

QNET Physics and Dynamics

Бренд: Quanser Страницы: 4

Бренд: Yamaha Страницы: 5

R100 Swell Series

Бренд: WAVEFIT Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды