BALUN BL510 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 20

background image

Dear Customer,

We are delighted that you have decided to buy a BL510 portable deadweight tester. Please read
these operating instructions for the BL510 portable deadweight tester carefully before connecting
and configuring it, and operate the device in compliance with the instructions. Operational safety
and the function of the device can only be guaranteed if the generally applicable legal safety and
accident prevention regulations, plus the safety instructions provided in the operating instructions,
are complied with.

We do not accept liability for any damage caused by improper use or incorrect operation. Please
ensure that all persons operating the device have read and understood the operating instructions.

Keep these operating instructions in a safe place so that they are accessible at all times when
needed.

If you require further information, please don’t hesitate to contact with us using the

following contact details:

1322, F/3, Bldg 1, 33 Zique Rd, Haidian, Beijing 100095, China

Phone: +86 (0) 10 6240 6768

[email protected]

www.baluntech.com

«
1
2
3
4
...
»

Содержание BL510





















Отзывы:

Нет отзывов

Похожие инструкции для BL510

Бренд: Rangevision Страницы: 31

Бренд: CAMAG Страницы: 40

Бренд: Nakayama Страницы: 37

Бренд: Unitary products group Страницы: 28

Бренд: Haag-Streit Страницы: 18

Бренд: Haag-Streit Страницы: 20

Бренд: V-TEK Страницы: 2

Бренд: V-TEK Страницы: 112

Бренд: Pablo Страницы: 7

Бренд: lancer Страницы: 3

Бренд: lancer Страницы: 12

Бренд: R2 Страницы: 26

Бренд: LANGER EMV-Technik Страницы: 25

Electric Clamshell CSE12-208VCD

Бренд: Lang Страницы: 16

Brillion 3631-25

Бренд: Landoll Страницы: 138

Бренд: York Страницы: 26

Бренд: TC Electronic Страницы: 67

Бренд: Tascam Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды