baltur TBML 1600 ME, Инструкция по установке, использованию и обслуживанию

Страница: 72 / 84

MAINTENANCE TIME
Part description Action to be performed Gas/Diesel
COMBUSTION HEAD
ELECTRODES VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEARLY
FLAME DISC INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY
COMBUSTION HEAD COMPO -
NENTS
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY
LIQUID FUEL NOZZLES REPLACEMENT YEARLY
LIQUID FUEL NOZZLE CHECKING AND REPLACING, IF NECESSARY, SOLENOID VALVES AND SEALING RINGS,
CLEANING ORIFICE AND SWIRLER
YEARLY
INSULATING GASKET SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY
GAS DELIVERY COUPLING SEAL SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY
AIR LINE
AIR GRILLE/DAMPERS CLEANING YEAR
AIR DAMPER BEARINGS GREASING, (Note: apply only on burners with bearings requiring lubrication) YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR
AIR PRESSURE SWITCH CLEANING YEAR
AIR PRESSURE PORT AND PIPES CLEANING YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR
GAS PRESSURE SWITCH FUNCTIONAL INSPECTION YEAR
VARIOUS COMPONENTS
ELECTRIC MOTORS COOLING FAN CLEANING, BEARING NOISE CHECK YEAR
LEVERS/TIE-RODS/BALL JOINTS CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR
ELECTRICAL SYSTEM CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR
INVERTER COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR
CO PROBE CLEANING AND CALIBRATION YEAR
O2 PROBE CLEANING AND CALIBRATION YEAR
FUEL LINE
HOSES REPLACEMENT 5 YEARS
PUMP FILTER CLEANING YEAR
LINE FILTER FILTERING ELEMENT CLEANING / REPLACEMENT YEAR
LIQUID FUEL TANK FILTER CLEANING WITH COLD FUEL OIL n.a.
GAS FILTER REPLACING THE FILTERING ELEMENT YEAR
HYDRAULIC/GAS SEALS CHECK OF ANY LEAKAGES YEAR
COMBUSTION PARAMETERS
CO CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
CO2 CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
BACHARACH SMOKE INDEX
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
NOX CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
IONISATION CURRENT CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
SMOKE TEMPERATURE CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
LIQUID FUEL DELIVERY/RETURN
PRESSURE CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
GAS PRESSURE REGULATOR PRESSURE MEASURED AT START-UP YEAR
IMPORTANT
In case of heavy-duty operation or when using special fuels, the maintenance intervals must be reduced adapting them to the real
operating conditions, according to the indications of the maintenance technician.
30 / 40
0006160375_202305
ENGLISH