baltur TBG 80 SLX ME, Инструкция по установке, использованию и обслуживанию

Страница: 67 / 80

MAINTENANCE
Analyse combustion gases and check that the emission values are
correct at least once a year, in compliance with current law.
• Clean air dampers, the air pressure switch with pressure port and
the relevant pipe, if any.
• Have the burner and the chimney cleaned by specialised personnel
(stove repairer); a clean burner is more efficient, lasts longer and is
quieter.
• Check the electrode condition. Replace them, if necessary.
• Check that the fuel filter is clean. Replace it, if necessary.
• Check that all components of the combustion head are in good
condition, have not been deformed and are free from impurities
or deposits deriving from the installation environment and/or from
combustion.
If a thorough check and/or cleaning of the combustion head is necessary,
take out its components according to the following procedure.
• Unscrew the four screws (1) and turn the burner body around the
pin (2).
• After pulling the ignition and ionisation cables (3) out of their
terminals, unscrew the locking nut (4) and remove the screw (5).
1
1
2
0002951270N12
3
4 5
0002951270N13
27 / 38
0006160424_202208
ENGLISH