baltur TBG 50 LX PN, Инструкция по установке, использованию и обслуживанию

Страница: 34 / 52

8 / 24
0006081327_201503
ENGLISH
2
4
6
8
0
10
12
14
mbar
0002922512
100
10
200 300 400 500 600 700 800 900 1000 1100
20 30 40 50 60 70 80 90 100 110
m
n
3
/h (Metano)
kW
1200 1300
120 130
1400 1500 1600
16
140 150 160
TBG 80LX ME
TBG 110LX ME
TBG 140LX ME
1700 1800 1900
170 180 190
TBG 200LX ME
OPERATING RANGE
The working ranges are obtained from test boilers corresponding to the standard EN676 and are indicatively for the combination
burner-boiler. For correct burner operation, the size of the combustion chamber must correspond to current regulations; if not, the
manufacturers must be consulted.
The figure below shows the gas supply line diagram. The gas train is certified in accordance with regulation EN 676 and is supplied separately from
the burner.
Install a manual on/off valve upstream of the gas valve according to the layout shown in the diagram illustrating the gas train.
Legend
1) Manual shut-off valve
2) Anti-vibration joint
3) Gas filter
4) Minimum gas pressure switch
5) Safety valve
6) Pressure regulator
7) Valve seal control device (obligatory for burner with
maximum nominal thermal output over 1200 kW)
GAS BURNER SCHEMATIC DIAGRAM
No. 0002910950
8) Pneumatic working valve
9) Control servomotor
10) Air adjustment gate
11) Air pressure switch
12) Combustion head
GAS TRAIN SUPPLIED BY THE MANUFACTURER TO BE MADE BY THE INSTALLER