baltur TBG 45 P, Инструкция по установке, использованию и обслуживанию

Страница: 58 / 72

ENGLISH
22 / 34
0006160178_201711
DIAGRAM FOR THE REGULATION OF THE ELECTRODE DISK DISTANCE
0002935683
TBG 60P-ME
TBG 45P-ME
E
A B C D
TBG 45P 4 5 4 4
TBG 60P 4 10 - 4
1 - Ionisation electrode
2 - Ignition electrode
3 - Flame disk
4 - Mixer
5 - Gas delivery pipe
E - WARNING: central nozzle hole outlet near the electrode tip.
AIR REGULATION ON THE COMBUSTION HEAD
The combustion head has a regulation device that allows the air
passage between the disc and the combustion head to be opened or
closed. Closing the passage, you can obtain high pressure upstream
of the disc even at low flow rate. The high speed and turbulence of
the air provides for its greater penetration into the fuel and therefore
an excellent mixture and flame stability. High air pressure upstream
of the disc may be necessary to prevent flame fluctuations, this is
particularly essential when the burner works on the combustion
chamber that is pressurised and/or at a high thermal load.
The device closing the air on the combustion head must be set to
such position as to always obtain, behind the disc, a very high air
pressure value. When the burner works at its maximum output,
regulate the air closure on the combustion head in such a way that
there is a generous opening of the air shutter regulating the air flow.
Therefore start the regulation with the device that closes the air on the
combustion head in an intermediate position, igniting the burner for an
indicative regulation as explained above. Move the combustion head
forward or backward to obtain an air flow adequate for the output.