baltur Minicomist 11, Руководство по эксплуатации

Страница: 14 / 44

EK
12 / 20
0006081159_201209
ENGLISH
OPERATION, INDICATIONS, DIAGNOSTICS
The reset button «EK...» is the main element to access all diagnostics functions (activation and
deactivation) and serves to unlock the command and control device.
The multicoloured «LED» indicates the command and control device status during both opera-
tion and diagnostic function.
RED
YELLOW
GREEN
Both «LED» and «EK...» are positioned under the transparent button. Pressing this button you reset the command and control device.
Possibility of two diagnostic functions:
1. Visual indication directly on the reset button: operation and diagnostic of device status.
2. Diagnostics with interface: in this case the OCI400 connecting cable is necessary and it can be connected to a PC with ACS400
software, or to gas analysers of different manufacturers (see technical sheet 7614).
Visual indication:
During operation, the command and control device phase is indicated on the reset button. The following table lists all colour sequences
and their meaning. To activate the diagnostic function, hold the reset button down for at least 3 seconds. A quick red flashing indicates
that the function is active (see data sheet 7614). Likewise, hold the reset button down for at least 3 seconds to deactivate the function (the
switching will be indicated with a flashing yellow light).
Command and control device status indication
Condition
Colour sequence
Colours
Waiting conditions TW, other intermediate statuses
. . . . . . . . . . . . . . . .
No light
Ignition phase Intermittent yellow
Correct operation, current strength of flame detector above the
minimum allowed
Green
Incorrect operation, current strength of flame detector below the
minimum allowed
Intermittent green
Decrease in power supply voltage Alternating Yellow and Red
Burner in lock condition Red
Fault indication (see colour legend) Intermittent red
Extraneous light upon burner start-up Alternating Green and Red
Quick flashing for diagnostics Quick flashing red
No light Red Yellow Green
Operating
position
Operating
position
Diagnostic
PC interface/diagnostic
analyser
Colour code table
COMMAND AND CONTROL EQUIPMENT FOR GAS BURNERS LME ...