Baltimore Aircoil Company FXV3, Инструкции по монтажу и сборке

Страница: 17 / 91

FXV3/CXVT Rigging & Assembly Instructions – Unit Rigging & Assembly
Page | 17
10. Before rigging the coil modules, wipe any moisture and debris from the corner columns and apply “D” seals (BAC part #
271665) at two locations on each coil module as shown in
Figure 14
and
Figure 15
.
a.
Coil module height “short” will receive 78” of “D” seal. Coil module height “tall” will receive 97 ” of “D” seal. Refer
to Table 2 and Table 3 to determine coil module height.
Figure 14. Coil Module as Seen from the Plenum Side
Figure 15. Detail of Corner Column
See
Figure 15
“D” Seal
“D” Seal
Rigging Guide
(4 Places)
Rigging Guide
Corner Column
78” or 97” Length
of “D” Seal
42” Length of “D” Seal
5/8” Space Between
Rigging Guide and “D” Seal