Baltimore Aircoil Company FXV3, Инструкции по монтажу и сборке

Страница: 10 / 91

FXV3/CXVT Rigging & Assembly Instructions – Unit Rigging & Assembly
Page | 10
3. Unit Rigging & Assembly
Rigging
NOTICE: For weight information, refer to the submittal drawing package.
NOTICE: All single-cell and multi-cell units must be rigged one section at a time.
: Failure to use appropriate lifting equipment can result in a dropped load, causing severe injury,
death, and/or property damage. Lifts must be performed by qualified riggers following BAC published Rigging
Instructions, and generally accepted lifting practices. The use of a supplemental safety sling may also be required if the
lift circumstances warrant its use, as determined by the rigging contractor.
Refer to Table 1 and Figure 1 , Figure 2 , and Figure 3 for each section’s required minimum spreader bar length W1
and the recommended minimum vertical dimension “H”.
Model Number
Lower Section Plenum Section Coil Section
H W1 H W1 H W1
FXV3-1224-xxx 20’ 12’ 20' 12’ 16’ 12’
FXV3-1426-xxx 20' 14’ 22' 14’ 16’ 14’
CXVT-x-1224-x, XECXVT-1224-x,
CXVT-x-2424-x, XECXVT-2424-x
20’ 12’ 20' 12’ 16’ 12’
CXVT-x-1426-x, XECXVT-1426-x,
CXVT-x-2826-x, XECXVT-2826-x
20' 14’ 22' 14’ 16’ 14’
Table 1. Minimum Vertical Dimension and Spreader Bar Length for FXV3 and CXVT Units
FXV3 Model
Number
Nominal
Box Size
Coil Module
Height
FXV3-1224-20x-xx
12’ x 24’
Short
FXV3-1224-24x-xx
12’ x 24’
Short
FXV3-1224-28x-xx
12’ x 24’
Tall
FXV3-1224-30x-xx
12’ x 24’
Tall
FXV3-1224-32x-xx
12’ x 24’
Tall
FXV3-1224-36x-xx
12’ x 24’
Tall
FXV3-1426-20x-xx
14’ x 26’
Short
FXV3-1426-24x-xx
14’ x 26’
Short
FXV3-1426-28x-xx
14’ x 26’
Tall
FXV3-1426-30x-xx
14’ x 26’
Tall
FXV3-1426-32x-xx
14’ x 26’
Tall
FXV3-1426-36x-xx
14’ x 26’
Tall
Table 2. FXV3 Nominal Box Size & Coil Module Height by Model Number