3
Assembly Diagram
Illustration # 1
1.)
2.)
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
3.)
Identify and Separate all the Parts and Hardware.
Attach the Right Leg(P3) and the Left Leg (P2) to the Bottom Support (P4) using two Screws
(A) for each leg as shown in Illustrstion #1. Tighten Screws (A) using Allen Wrench (E). Insert
Top Support (P5) between the Right Leg (P3) and Left Leg (P2) top tube and attach using one
Socket Screw (B1) through each leg. Place a Spring Washer (G) on each caster stem and
screw in two Locking Casters (D) and two Casters (D1) into the threaded holes in the bottom of
the legs as shown. Tighten with Caster Wrench (F).
Insert a Handle (P6) through the large hole at the top of each leg. Place the Lock
Rod (P7) between the legs. Insert the handle into the end of the Lock Rod (P7), align
holes and secure by using one Screw (A) in each Handle (P6) as shown in Illustration #2.
Illustration # 2
P3
P2
B1
P4
P5
B1
A
D
D1
D
D1
A
P7
P2
P6
G
G