4
Insert the Main Platform (P3) onto the Pole (P2) and
slide it down to the desired position. Tighten in
place by clamping down the lock lever as shown in
Illustration #4.
Insert the Side Platform & Pull Out Shelf (P4) onto
the Pole (P2) and slide down to the desired
position. Tighten in place by clamping down the
lock lever. See illustration #4.
6.)
Insert the Side Platform (P5) onto the Pole (P2) and slide
down to the desired position. Tighten in place by
clamping down the lock lever. See illustration #4.
5.)
7.)
8.) Use the Straps (E) through the slots in the Side Platform (P5)
and the Side Platform & Pull Out Shelf (P4) to secure
your equipment in place. (See Illustration #5)
9.) Snap-on three Cable Ties (F) onto the Pole (P2) to help with wire management as shown in
illustration #5.
27588_07-25-12
Illustration # 5
Illustration # 3
E
P5
P4
E
F
P5
P2
P4
P3
Clamp Lever
Illustration # 4
4.) Attach the Book Stop (H) to the top front edge of
the Main Platform (P3) using three Book Stop
Screws (G) from underneath as shown in
illustration #3.
G
H
P3
