3
#27588
Assembly Diagram
Identify and Separate all the Parts and Hardware.
Illustration # 1
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
1.)
2.)Push in five Casters (A) into the bottom of the
Base (P1) as shown in Illustration # 1.
3.)
P1
A
Illustration # 2
Insert the Pole (P2) into the Base (P1). Make sure you
place the end of the Pole that has the threaded insert into
the Base. Place the Base Weight (P6) under the Base
(P1) and attach to the Pole (P2) using one Hex Head Bolt
(D). (See Illustration #2) Tighten the Hex Head Bolt using
the Wrench (B).
Do not use unless all screws are tight. At least every six months, check all screws to be sure
they are tight. If parts are missing, broken, damaged, or worn, stop use of the product
until repairs are made by your dealer using factory authorized parts.
P2
P6
D
P1
