– 8 –
■
Before using the appliance
Perform the following procedure more than twice to clean the appliance before using.
1. Remove the cap on the spout and rinse out the inside of the appliance.
2. Fill the appliance with 0.6 L of water (to the MAX level).
3. Boil the water.
4. Discard the boiled water.
■
Using the appliance
While or shortly after using the appliance, its surface, the spout, the area around
the steam vent of the lid and the power base is hot. Do not touch these parts.
Doing so may cause scalding (or burns). Hold the handle when using the appliance.
Remove the lid and fill the appliance with water (up to 0.6 L).
MAX
0.6 L
Max fill line
0.6 L = 20 fl oz
Do not fill the appliance with
anything other than water.
Doing so may cause the substance to
spurt out, causing scalding (or burns).
Do not overfill.
Do not boil more than 0.6 L of water.
Filling above the max fill line may
cause boiling water to overflow and
spurt out of the spout and cause
scalding (or burns).
Close the lid firmly, place the appliance onto the power base, and insert the
power plug into the outlet.
Steam vent
Ensure that
the steam
vent faces the
same direction
as shown in
the illustration.
Close the lid firmly.
When the lid is not properly closed,
the automatic OFF function may not
work and cause the water to dry out.
This may cause the appliance to emit
smoke and catch fire.
Place the power base on a flat and
secure surface.
Failure to do so may cause scalding
(or burns) or injury.
