CineVision Game Assembly
Technical Publications – Las Vegas, Nevada
DOC-103500
Publication Date: February 25, 2011
VERSION
.01
Page 6 of
34
Introduction
About this Guide
The purpose of this document is to assist Bally Gaming assembly technicians with a CineVision cabinet
assembly. This document is divided into three sections as follows.
Table 1: Installation
Section
Description
One
Main Cabinet Assembly
Two
Cabinet Base Assembly
Three
Top Box Cabinet Assembly and Installation
Parts and Assemblies
Portions of the CineVision cabinet are preassembled and installed prior to reaching Bally’s assembly line.
Remaining portions of the assembly require the contents of 103126 (Cabinet Parts Kit), 105502 (Cabinet
Base Assembly), and 104217 (Top Box Parts Kit). The contents of each kit are listed at the beginning of
sections one, two, and three as described in Table 1. See Table 2 for the hardware needed to install the
contents of each parts kit:
Table 2: Required Hardware
Part Number
Description
Quantity
18454
Shoulder Washer
3
NLS-LSPP-M0470-1205
Screw
6
NLS-LSPP-M0350-1206
Screw
4
NLS-M0350-1206
Nut
8
NLS-M0470-1117
Nut
40
Recommended Tools & Supplies
Be sure to have the following tools and supplies available throughout the assembly:
