Balluff mvHYPERION Series, Техническое руководство

Страница: 21 / 94

1.7 Quickstart 17
• Linux x86 (32-bit)
– The 32 bit version will run on a 64-bit Linux system if the other library requirements are met with 32-bit
libraries. i.e. you cannot mix 64 and 32-bit libraries and applications.
– Versions for Linux on x86-64 (64-bit), PowerPC, ARM or MIPS may be possible on request.
• GNU compiler version GCC 3.2.x or greater and associated toolchain.
Other requirements
• libexpat ( http://expat.sourceforge.net )
• Optional: wxWidgets 2.6.x (non Unicode) for the wxWidget test programs.
• Optional: udev or hotplug subsystem (see also 6. below).
As an example of which packets need to be installed, consider OpenSuSE 10.1:
• The compiler used is gcc 4.1.0 and may need to be installed. Use the "gcc" und "gcc-c++" RPMs. Other
RPMs may be installed automatically due to dependencies (e.g. make).
• libexpat will almost definitely be installed already in any software configuration. The RPM is called "expat".
• Install the wxWidgets "wxGTK" and "wxGTK-develop" RPMs. Others that will be automatically installed due
to dependencies include "wxGTK-compat" and "wxGTK-gl". Although the MATRIX VISION software does not
use the ODBC database API the SuSE version of wxWidgets has been compiled with ODBC support and the
RPM does not contain a dependency to automatically install ODBC. For this reason you must also install the
"unixODBC-devel" RPM.
• OpenSuSE 10.1 uses the udev system so a separate hotplug installation is not needed.
Hardware requirements
PC with PCI Express Single lane
Note
The driver contains libraries for Linux x86 (32 bit) or Linux 64-bit (x86_64). There are separate package files
for systems with toolchains based on GNU gcc 3.2.x - 3.3.x and those based on GNU gcc
>
= 3.4.x. gcc 3.1.x
may work but, in general, the older your toolchain is, the lass likely it is that it will work. Toolchainss based on
GNU gcc 2.x.x are not supported at all.
1.7.3.2 Installing the mvIMPACT Acquire driver
1.7.3.2.1 Using the installer script To use the mvHYPERION frame grabber within Linux (grab images from it
and change its settings), a driver is needed, consisting of several libraries and several configuration files. These
files are required during
run time .
To develop applications that can use the mvHYPERION frame grabber, a source tree is needed, containing header
files, makefiles, samples, and a few libraries. These files are required at
compile time .
Both file collections are distributed in a single package:
mvHYPERION-x86_ABI2-n.n.n.tgz
MATRIX VISION GmbH