Balluff MATRIX VISION BVS 3D-RV1, Сборка и руководство по эксплуатации

Страница: 48 / 64

3.4. Power-supply specifications
3.4 Power-supply specifications
The 3D stereo camera needs to be supplied by a DC voltage source. The camera’s standard package does
not include a DC power supply. Each 3D stereo camera must be connected to a separate power supply.
Connection to domestic grid power is only allowed through a power supply certified as EN55011 Class B.
Table 3.5: Absolute maximum ratings for power supply
Min Nominal Max
Supply voltage 22.0 V 24 V 26.0 V
Max power consumption 48 W
Overcurrent protection Supply must be fuse-protected to a maximum of 2 A
EMC compliance see Electronical and safety standards (Section 1.4 )
Warning:
Exceeding maximum power rating values may lead to damage of the 3D stereo camera, power
supply, and connected equipment.
Warning: A separate power supply must power each 3D stereo camera.
Warning: Connection to domestic grid power is allowed through a power supply certified as EN55011
Class B only.
3.5 Wiring
The 3D stereo camera is delivered with a sync cable already connected between projector and cameras.
It is the customer’s responsibility to connect the two provided M12 X-coded network cables to the left and
right camera, as well as the power cable with an angled M12 connector to the projector (see
Fig. 3.3 ). The
network cables must be clipped into the cable guide for strain relief. All cables must be secured to the
mounting bracket.
Power
cable
Network cable
left camera
Fasten into
cable guide
Network cable
right camera
Fasten into
cable guide
Fig. 3.3: Locations of the electrical connections for the 3D stereo camera
Warning: Due to the voltage drop, the maximum power cable length is limited to 15 m. The supply
voltage should be set to the specified 24 V and must not be set above 26 V due to the highly variable
current draw of the 3D stereo camera.
MATRIX VISION GmbH
Manual: BVS 3D-RV1
15 Rev: 1.0
Status: Nov 14, 2022