Balluff BVS SC Series, Руководство пользователя

Страница: 27 / 45

4 PRODUCT DESCRIPTION
25
www. matrix-vision.com
BVS SC-_1280Z00-70-000
SMART
CAMERA
IO
www.balluff.com
Figure 11 NPN mode, I/O 0 configured as output
The output current of an I/O may not exceed 100 mA. If the output is being overloaded,
e.g. by a short circuit, it is switched off and periodically checked whether the fault occur-
rence is still present. If the error was removed, the output is again in normal operating
state without a reset.
It is also possible to use input and output functions at the same time. In the following
example, I/O 0 is configured as output and I/O 1 as input.
Figure 12 NPN mode, I/O 0 configured as output and I/O 1 as input