Balluff BTL PA0400 Series, Руководство пользователя

Страница: 39 / 204

www.balluff.com 17 english
The values are typical for the
BTL PA0400- _ _ _ _ -C15A _ _ _ _ -000S15 at 24 V DC,
room temperature and a measurement length of 500 mm
together with magnet BTL6-A-3800-2 or BTL6-A-3801-2.
The product is immediately ready for operation, full
accuracy is achieved after the warm-up phase.
Further data can be found at www.balluff.com
on the product page.
9.1 Ambient conditions
Ambient temperature −25…+85 °C
Storage temperature −40…+100 °C
Relative humidity ≤ 90%, non-
condensing
Typ. temperature coefficient
1)
≤ 30 ppm/K
Shock rating as per
EN 60068-2-27
2), 3)
100 g/6 ms
Continuous shock per
EN 60068-2-27
2), 3)
50 g/2 ms
Vibration per EN 60068-2-6
2), 3)
12 g,
10…2000 Hz
Protection per IEC 60529 (when
threaded together)
IP67
9.2 Detection range/Measuring range
Measuring length 25...4000 mm
Analog resolution
…-C15AA/-C15A1… 183 μV / ≥ 4 μm
…-C15AE/-C15A5… 351 nA / ≥ 4 μm
Repeat accuracy
Measuring length ≤ 500 mm ≤ ±10 µm
Measuring length > 500 mm ≤ ±0.002% FS
Length-dependent measuring
frequency
…-C15A_ _ _0-…
Measuring length ≤ 1270 mm 1000 Hz
Measuring length > 1270 to
≤ 2650 mm
500 Hz
Measuring length > 2650 mm 250 Hz
…-C15A_ _CA-… (High update rate)
Measuring length ≤ 240 mm 4000 Hz
Measuring length > 240 to
≤ 590 mm
2000 Hz
Linearity deviation
4)
with measuring length ≤ 500 mm ≤ ±60 µm
with measuring length > 500 to
≤ 4000 mm
≤ ±0.012% FS
Detectable speed ≤ 10 m/s
9.3 Electrical data
Operating voltage U
b
10…30 V DC
Current draw (at 24 V DC)
…-C15AA_ _0-…/…-C15A1_ _0-… ≤ 80 mA
…-C15AE_ _0-…/…-C15A5_ _0-… ≤ 110 mA
…-C15AA_ _A-…/…-C15A1_ _A-… ≤ 90 mA
…-C15AE_ _A-…/…-C15A5_ _A-… ≤ 120 mA
Power consumption
…-C15AA_ _0-…/…-C15A1_ _0-… ≤ 2.0 W
…-C15AE_ _0-…/…-C15A5_ _0-… ≤ 2.7 W
…-C15AA_ _A-…/…-C15A1_ _A-… ≤ 2.2 W
…-C15AE_ _A-…/…-C15A5_ _A-… ≤ 2.9 W
Overvoltage protection U
b
up to 36 V DC
Voltage-proof up to (GND – Housing) 500 V DC
…-C15AA/C15A1…
Output current ≤ 5 mA
…-C15AE/C15A5…
Load resistance R
Lc
≤ 500 ohm
9.4 Electrical Connection
Short circuit protection Signal output to
GND and
30 V DC
Protected against polarity reversal
5)
U
b
up to 30 V DC
1)
Measuring length 500 mm, magnet in the middle of the measuring range
2)
Individual specifications as per Balluff standard
3) Resonant frequencies excluded
4)
Configuration for one magnet
5)
A prerequisite is that no current can flow between GND and 0 V in the
event of polarity reversal.
9
Technical data
BTL PA0400- _ _ _ _ -C15A _ _ _ _ -000S15
Magnetostrictive Linear Position Sensor – Profile Style