Balluff BNI IOW-560-W01-K022, Руководство пользователя

Страница: 22 / 32

6 english
2.1 Intended use
The IO-Link Wireless Bridge converts IO-Link to IO-Link
Wireless and connects a wired IO-Link device via IO-Link
Wireless to an IO-Link Wireless Master. The device can be
an IO-Link sensor, an IO-Link actuator or an IO-Link hub.
The IO-Link Wireless Bridge is intended for use in industrial
applications.
Flawless function in accordance with the specifications in
the technical data is ensured only when using suitable
original Balluff accessories. Use of any other components
will void the warranty.
The module may only be operated with an approved
power supply. Only approved lines may be connected.
Non-approved use is not permitted and will result in the
loss of warranty and liability claims against the
manufacturer.
2.2 Reasonably foreseeable misuse
The product is not intended for the following applications
and areas and may not be used there:
– In safety-oriented applications in which personal safety
depends on the device function
– In explosive atmospheres
– in domestic settings (product is class A (EMC limit) for
the industrial sector)
2.3 General safety notes
Activities such as installation , connection and startup
may only be carried out by qualified personnel.
Qualified personnel are persons whose technical
training, knowledge and experience as well as knowledge
of the relevant regulations allow them to assess the work
assigned to them, recognize possible hazards and take
appropriate safety measures.
The
operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the product will not result in hazards to persons
or equipment.
The product must not be opened, modified or changed. If
defects and unresolvable faults occur in the product, take
it out of service and secure against unauthorized use.
2
Safety notes
BNI IOW-560-W01-K022
Network interface