Balluff BNI IOL-104-011-K006, Руководство пользователя

Страница: 32 / 40

12 english
6.1 Startup
DANGER
Uncontrolled system movement
When starting up, if the BNI module is part of a closed
loop system whose parameters have not yet been set,
the system may perform uncontrolled movements. This
could result in personal injury and equipment damage.
►
Persons must keep away from the system’s
hazardous zones.
►
Startup must be performed only by trained technical
personnel.
►
Observe the safety instructions of the equipment or
system manufacturer.
1.
Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check adjustable parameters and reconfigure the BNI
if necessary.
Check for the correct values, especially after
replacing the BNI or after repair by the manufac-
turer.
6.2 Operation
Operating notes
– Regularly check function of the BNI and all associated
components.
– Depending on the operating conditions, it may be
necessary to regularly check and, if necessary,
retighten the tightening torques of the plugs and caps
to maintain the protection class (see chapter 5.1 on
page 10).
– Take the hub out of service whenever there is a
malfunction.
– Secure the system against unauthorized use.
– Check fasteners and retighten if needed.
6.3 Cleaning
The product may only be cleaned when switched off.
►
Clean the product regularly.
The cleaning intervals depend on the ambient conditions
and the frequency of use.
6.4 Maintenance
The product is maintenance-free.
6
Startup and operation
BNI IOL-104-011-K006
Network interface – Digital hub