Balluff BNI EIP-306-000-Z010, Руководство пользователя, Страница: 12 / 22

www.balluff.com
11
4 Technical data
4.5. Ethernet
Ethernet IP port 1 x 10Base-/100Base-Tx
Connection for Ethernet IP port M12, D-coded, female
Cable types per IEEE 802.3 Shielded twisted pair min. STP CAT 5/ STP CAT 5e
Data transmission rate 10/100 Mbit/s
Max. cable length 100 m
Flow control Half Duplex/Full Duplex (IEEE 802.33x-Pause)
4.6. Function
indicators
LED Display Function
UA
green Output power OK
red Low Output power (< 18V)
Mod
green flashing Wrong or no configuration on module
green Module operating
red flashing Fixed busclock is not possible
red-green flashing Initial sequence
Net
off Module got no IP address
green flashing Module got IP, but no connection could be
established
green Connection established
red flashing Connection timeout
red-green flashing Initial sequence
100
off Bus clock: 10 Mbit/s
yellow Bus clock: 100 Mbit/s
US
green Input power OK
red Low Input power (<18V)
LNK green Data transfer
Port Each Port has two two colour LED´s to indicate the I/O-States.
Display Function Description
off I/O-State State of the Input or Output Pin is 0
yellow I/O-State State of the Input or Output Pin is 1
red Short-circuit single LED:
Short-circuit on dedicated Pin (only if this pin is used
as an output)
both LEDs:
Short-circuit between Pin 1 and 3 or Short-circuit on
both output pins
Status
–LEDs: Modul status
Port/Pin LEDs: Status of the IO Link and I/O ports