www.balluff.com
Balluff Network Interface / DeviceNet Fieldbus Distributor
9
Getting Started
AUX Power (7/8“ 4-pin plug)
PIN
Function
1
+ 4 V Output power (actuator)
+ 4 V Input power (sensor)
Earth
4
Common GND (0V)
DC voltage 4 V DC.
Provide sensor/bus power and actuator power from separate power sources if possible.
Total current < 9 A. The total current of all modules may not exceed 9 A even when daisy
chaining the actuator supply.
BNI DNT-x0x-000-Z00
BNI DNT-104-000-Z004
Fig. : Ground connection
Note!
The FE connection from the housing to the machine must be low-impedance and as
short as possible.
–
–
–
3
3.3 Electrical
connection
Supply voltage
Function ground