Balluff Network Interface / DeviceNet Fieldbus Distributor
4
Safety
The BNI DNT-... serves as a decentral in- and output module for connecting to a DeviceNet
network.
Installation and startup
Installation and startup are to be performed only by trained specialists. Any damage resulting
from unauthorized manipulation or improper use voids the manufacturer's guarantee and war-
ranty.
The device is an equipment in accordance with EMC Class A. Such equipment may generate RF
noise. The operator must take precautionary measures accordingly.
The device must be powered only using an approved power supply
(see "Technical data" on
page 1)
. Only approved cables may be used.
Operation and testing
The operator is responsible for observing local prevailing safety regulations.
When defects and non-clearable faults in the device occur, take it out of service and secure
against unauthorized use.
Approved use is ensured only when the housing is fully installed.
Caution!
The pictogram used with the word "Caution" warns of a possible hazardous situation
affecting the health of persons or equipment damage. Ignoring these warnings can
result in injury or equipment damage.
Always observe the described measures for preventing this danger.
�
2.1 Intended use
2.2 General safety
notes
2.3 Meaning of the
warnings
2
