Balluff BMF 203K-H Series, Конденсированное руководство

Страница: 4 / 20

1
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
english
BMF 203K-H- _ _ -C-A _ -… / BMF 235K-H- _ _ -C-A _ -…
Magnetic Field Sensors
Intended use
BMF family sensors are designed to detect the position of
pistons in pneumatic and hydraulic cylinders and grippers.
Flawless function in accordance with the specifications in
the technical data is ensured only when using original
Balluff accessories. Use of any other components will void
the warranty.
Non-approved use is not permitted and will result in the
loss of warranty and liability claims against the
manufacturer.
General safety notes
Installation and startup may only be performed by
qualified personnel with basic electrical knowledge.
The
operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the measuring system will not result in hazards to
persons or equipment.
If defects and unresolvable faults occur in the measuring
system, take it out of service and secure against
unauthorized use.
Downloading further instructions
A detailed user’s guide can be downloaded from the
Internet at
www.balluff.com
or requested via e-mail from
service@balluff.de
.
Dimensions and function
The BMF 203/235K-H-_ _-C-A_-… is a magnetic field
sensor and is intended for use in pneumatic cylinders and
grippers having C-slots (BMF 203…) or T-slots (BMF 235…).
M12
M08
BMF 203K-…
BMF 235K-…
Sensor Control element Connection
cable:
yellow LED
orange LED
Teach-in button
Active surface
Active surface
green LED
plug:
Dimensions and function (continued)
LED Operating state
Color State
Green On Power OK
Inverse
flashing
IO-Link communication active
Orange On Switchpoint 2 is active
(magnet is at the taught position)
Off Switchpoint 2 is inactive
(magnet is not at the taught position)
Yellow On Switchpoint 1 is active
(magnet is at the taught position)
Off Switchpoint 1 is inactive
(magnet is not at the taught position)
Sustained, asynchronous flashing of all LEDs
indicates a serious error. Possible causes are:
Short circuit on an output, sensor overload or
defective sensor.
Electrical connection
BMF…- PS -…
M
WH
BN
+
−
S1
S2
BU
BK
BMF…- PO -…
M
WH
BK
+
−
S1
S2
BN
BU
BMF…-
NS
-…
BN
M
WH
BK
+
−
S1
S2
BU
BMF…- NO -…
BN
M
WH
BK
+
−
S1
S2
BU
BMF…- PI -…
WH
BN
+
−
S1 / IO-Link
S2
BU
BK