Balluff BLA 50A-002-S4, Руководство пользователя

Страница: 30 / 44

english 8
If the BLA does not respond to keystrokes
or the screen is black, so it may be due to
an access lock set via IO-Link. In this case,
the BLA must first be unlocked via IO-Link
before it can be manually configured on the
device.
Digital outputs
Detection
tolerance
Area automatically
hidden for
Normalize
(Autoblanking)
Number of the
detected object
Analog output 2
selected mode
Visualization of the
object in the light band
Hidden area
(Blanking function active)
Analog output 2
Current measurement value [mm]
Analog output 1
Current measurement value [mm]
Analog output 1
selected mode
Status LED 2
(object display)
Status LED 1
(power indicator)
Digital outputs
selected mode
Fig. 4-1: View showing value display
Status LED meanings:
– LED1 (green): Always turned on
– LED2 (yellow): On when there is an object in the field (at least one edge detected)
4.1 Introduction
After the unit is powered up, it is ready to use and displays
the current measurement values together with the selected
measuring modes.
The device can either be programmed from the keypad
and the integrated display, or via the IO-Link interface.
The unit is controlled using 4 keys on the BLA receiver:
Label Function
C
Go back to the higher menu level
∧
Page forward in the list; increase values
∨
Page back in the list; decrease values
OK Confirm
Changes to the settings are automatically saved and are
stored after power is turned off.
4
Operation and mode selection
BLA 50A-002-S4
Balluff Light Array
BLA 50A-002-S4