Balluff Inductive Coupler
Base BIC 1I0-I2A50-M30MI3-SM4A4A and
Remote BIC 2I0-I2A50-M30MI3-SM4A5A
1
User instructions
1.1
Validity of the
Guide
This manual describes the structure, function and installation of the Balluff Uni-Standard
inductive coupler. It is valid for types:
Base BIC 1I0-I2A50-M30MI3-SM4A4A and
Remote BIC 2I0-I2A50-M30MI3-SM4A5A (see type code)
The guide is intended for qualified technical personnel. Read the guide before you install
and operate the devices.
1.2
Typographical
Conventions
The following typographical conventions are used in this guide.
Enumerations
Enumerations are shown as a list with an en-dash.
-
Entry 1
-
Entry 2
Syntax
Numbers
-
Decimal numbers are shown without additional indicators (e.g. 123),
-
Hexadecimal numbers are shown with the additional indicator hex (e.g. 00hex).
Cross-references
Cross-references indicate where additional information on the topic can be found:
(see Chap. 5, Section "Technical data").
1.3
Symbols
Note, tip
This symbol indicates general notes.
Caution!
This symbol indicates a safety instruction that must be followed without exception.
IO-Link
This device is IO-Link-capable
1.4
Abbreviations
BIC
Balluff Inductive Coupler
EMC
Electromagnetic Compatibility
FE
Function Ground