Balluff BDG D 60-H020-NUS01-1318-0000-S4L4 Series, Руководство пользователя, Страница: 33 / 94

www.balluff.com 13 english
6.1 Startup
DANGER
Uncontrolled system movement
When starting up, if the sensor is part of a closed loop
system whose parameters have not yet been set, the
system may perform uncontrolled movements. This
could result in personal injury and equipment damage.
►
Persons must keep away from the system’s
hazardous zones.
►
Startup must be performed only by trained technical
personnel.
►
Observe the safety instructions of the equipment or
system manufacturer.
1.
Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check measured values and adjustable parameters.
Check spacing over the entire measuring range.
Check for the correct values, especially after
replacing the BDG or after repair by the
manufacturer.
6.2 Operation
No further protective measures are required for operation.
LC display see chapter 4.2 on page 9.
6.3 Operating notes
– Regularly check function of the BDG and all associated
components.
– Take the BDG out of operation whenever there is a
malfunction.
– Secure the system against unauthorized use.
– Check fasteners and retighten if needed.
6.4 Cleaning
All cleaning agents suitable for the material may be used.
6.5 Maintenance
The product is maintenance-free.
6
Startup and operation
BDG D_ _60-H020-NUS01-1318-0000-S4L4
Digital position indicator