BAM MD-VS-001-x
Base Station/Charger
4
Selecting the Interface Type
13
www.balluff.com
4
Selecting the Interface Type
Upon completing the physical connection between the reader and its host, scan the appro-
priate barcode for your system’s correct interface type.
4.1
Configuring the Interface
Scan the programming barcode which selects the appropriate interface type for the system
the reader will be connected to.
NOTE
Unlike some other programming features and options, interface selec-
tions require that you scan only one programming barcode label. DO
NOT scan an ENTER/EXIT barcode prior to scanning an interface
selection barcode.
Some interfaces require the scanner to start in the disabled state
when powered up. If additional scanner configuration is desired while
in this state, pull the trigger and hold for 5 seconds. The scanner will
change to a state that allows programming with barcodes.
RS-232
RS-232 standard interface
Select RS232-STD
USB
USB COM to simulate RS-232 standard interface
USB-COM-STD
a
USB-OEM
(can be used for OPOS/UPOS/JavaPOS)
USB-OEM
USB Keyboard with standard key encoding
Select USB Keyboard