Balluff BAM MD-VS-001-0002, Руководство по эксплуатации

Страница: 160 / 314

160
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
GS1 DataBar™
Expanded Set
Length 2 This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded Length Control .
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in
Fixed Length Mode. Length includes the barcode’s data characters only. The length can be set
from 1 to 74 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table GS1 DataBar™ Expanded Length 2 Setting Examples provides examples for setting
Length 2. See page 250 for detailed instructions on setting this feature.
GS1 DataBar™
Expanded
Length 2 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (ignore
second
length)
07
Characters
52
Characters
74
Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
4
Scan Two Characters
From
Appendix D:
Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘5’ and ‘2’ ‘7’ and ‘4’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select GS1 DataBar™ Expanded Set Length
2 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
CANCEL
$CXBL2
~
DEFAULT
74 = Length 2 is 74 Characters