Balluff BAE010H, Руководство пользователя

Страница: 30 / 52

30
Continuation „
Serial Menu
”:
SERIAL PROTOCOL
Determines the sequence of characters send, when using the serial output for cyclic data
transmission under time control (xxxxxxx = value SERIAL VALUE).
Setting „1“ removes the unit address from the string which allows a slight faster transmission cycle.
0
Transmission report = Unit Nr., +/-, data, LF, CR
1 1 +/- X X X X X X X LF CR
1
Transmission report = +/-, data, LF, CR
+/- X X X X X X X LF CR
SERIAL TIMER (S)
This register determines the cycle time in seconds for cycling transmission of SERIAL VALUE when
using the serial output. (On a serial request, the cycling transmission is stopped for 20 s)
0.000
All cyclic transmission is switched off. The unit will send data upon a serial
request or with command SERIAL PRINT.
…
60.000 Cycle time in seconds.
SERIAL VALUE
This parameter defines the value to be transmitted.
Setting Code Register contents
0
:0 Value input 1
1 :1 Value input 2
2 :2 Result of the linking of input1 and input 2
3
:3 Result totalizator 1
4 :4 Result totalizator 2
5 :5 Result of the linking of 1 and 2 with totalization
6 :6 Minimum value input 1
7
:7 Maximum value input 1
8
:8 Minimum value input 2
9 :9 Maximum value input 2