Balluff BAE SA-OH-064-NP-DP02, Руководство пользователя

Страница: 27 / 36

www.balluff.com 9 english
BAE SA-OH-064-_P-DP02 / BAE SA-OH-064-_P-S75G
Photoelectric Sensors
4.1 Construction
The electrical connection is made via a cable or plug
connection (see Type code on page 16).
4.2 Function
The sensor amplifier serves as a processor unit for Balluff
sensors of the BOH series.
4.3 Operating and display elements
The settings of the amplifier can be changed via the control
panel with the status LEDs.
Fig. 4-2:
'II
'II
Output LED (OUT)
Power LED (PWR)
Rotary potentiometer
Amplification factor
(SENSITIVITY)
Switch mode
switch
Resolution switch
(RES)
Delay switch
Control panel of the amplifier
4.3.1 Operating elements
Switch
Switch Position Function
Switch
mode
Dark on Low active
Light on High active
Resolution
(RES)
St. High range (12% hysteresis)
Hi.
High resolution with low range
(3% hysteresis)
Delay
On D 50 ms switch-on delay
Off No delay
Off D 50 ms switch-off delay
Tab. 4-1: Switch
Rotary potentiometer
Rotary
potentiometer
Function
Amplification factor
(SENSITIVITY)
Setting of amplification factor of
electronics
Tab. 4-2: Rotary potentiometer
4.3.2 Display elements
LED Function
Power LED
(PWR)
Green,
static
Device ready
Green
flashing
Signal value in hysteresis
Red, static Error
Output LED
(OUT)
Yellow,
static
Switch output switched
Off Switch output not switched
Tab. 4-3: Display elements
4.4 Labeling
1)
Alternatives Anschlussbild:
1 - brown +VDC
2 - blue GND
3 - black OUT NPN
4 - white n.c.
2)
1)
3)
Order code
2)
Type
3)
Serial number
Fig. 4-3: Labeling (example)
4
Product description (continued)