Ballu KFR-3502BPE, Руководство по обслуживанию

Страница: 37 / 46

11. DISASSEMBLY INSTRUCTIONS
跡掑蹟隊
Front panel
Grille
1. Remove the grille
1) Open the screw cover in the grille.
2) Take out the screws of the grille.
3) Hold the both sides of the front panel and drag it towards
oneself
,
shown the switching board of the indoor unit.
4) Remove the grille.
2. Remove the electrical control box
1) Remove the electrical control box cover.
2) Remove the indoor coil sensor from the sensor bracket.
3) Take out the screws of the terminal and remove the
terminal board.
4) Disconnect all connectors on the printed circuit board.
5) Remove the printed circuit board and check-up it.
6) Disconnect the circuitry in the electrical control box.
7) Take out the screws of the electrical control box and
remove the electrical control box.
3. Remove the air outlet frame
1) Take out the screws of the stepper motor, disconnect
the stepper motor and the air outlet frame.
2) Remove the stepper motor.
3) Disconnect the drainage hose and the air outlet frame.
4) Take out the screws of the air outlet frame.
5) Remove the air outlet frame.
KFR-3502G/BPE
OPERATION PROCEDURE
PHOTOS
Indoor Coil Sensor
Terminal Screw
Screws
Terminal
Electrical Control Box Cover
Grille Screws
Display Board
Stepper Motor
36