WWW.BALLISTIGLASS.COM
(800) 960‐4097
BALLISTIGLASS LLC
PARKLAND, FL 33076 USA
BALLISTIGLASS and BALLISTISCAN are registered trademarks of Ballistiglass LLC. All rights reserved.
Step 1: Set up equipment
1. Set up the stanchions (barrier poles) 4 feet apart.
2. Open the BallistiScan case, remove laptop PC, and set aside the 2 metal sensors.
3. Attach the two sensors on top of the stanchions using the supplied Velcro strips.
Figure 1: The sensors must be oriented perpendicular to pedestrian traffic using the
red lines
(imaginary) formed between screws as a guide.
4. To protect pedestrians from tripping over the sensor cables, cover the pathway with a mat.
Digital Signal Processor (DSP)
USB cable (already attached to DSP)
DSP power cable (already attached to DSP)
Sensors with cables already attached to DSP